Custom Image for MAG Box (Entry Package)

Created by: Ronald Suan

Modified on: Tue, 19 Feb, 2019 at 4:19 AM


You can use to put older firmware on your MAG

Mag250 https://1drv.ms/f/s!AvIxx3ltAugTgqde3OmW9foUt9-qqQ

Mag254 https://1drv.ms/f/s!AvIxx3ltAugTgqcSh8shMzd4r373XQ

Mag256 https://1drv.ms/f/s!AvIxx3ltAugTgqcp_LyScdjA42HvvA

Mag322https://1drv.ms/f/s!AvIxx3ltAugTgqcUbfd4hvRZR5l8qA

Mag324https://1drv.ms/f/s!AvIxx3ltAugTgqcj9RdOvUll3dks6Q

Mag349https://1drv.ms/f/s!AvIxx3ltAugTgqcglDeix5jzS9xMbA

Mag351https://1drv.ms/f/s!AvIxx3ltAugTgqcdDKdvEgNBj22eiw


To make sure they work please install from the recovery area of Mag (hold down menu button 10 during reboot) - Put files on usb (FAT32) in folder named mag*** (*** is your Magbox number e.g.mag256) - Reset to default first then use usb to downgrade.

Make sure you remove ethernet until you have turned off auto update


Video guides for updating all MAGs are on Infomir site

Different for each type of box and need to be used with the specific instructions

e.g For 3 series = Guide: https://wiki.infomir.eu/eng/set-top...24-349-351/software-update-mag322-324-349-351. And video can be found half way down page (ctrl +f search for video if you dont see it)

For 2 series except 256https://wiki.infomir.eu/eng/set-top...mag250-254-270/software-update-mag250-254-270Video half way down page

For 256https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/mag256/software-update-mag256Video same as 2 series other stuff different 




R
Ronald is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.