How to setup IPTV on Enigma2 (DreamBox/Vu+ etc)

Created by: Taylor F

Modified on: Wed, 15 May, 2019 at 5:31 PM

1- Download and install DCC or Putty

2- Open DCC or Putt

3- Typing host name : local ip address for box

4- Connection type setting : Telnet

5- Enter

6- Username and password entered ( user and pass : root )

7- Copy the command, m3u line we send you by email:   wget -O /etc/enigma2/ http://ourdns:port/get.php?username=XXX&password=XXX&type=enigma22_script&output=mpegts” && chmod 777 /etc/enigma2/ && /etc/enigma2/

8- Paste it in DCC or Putty ssh

9- Enter / Wait for it to be installed

10- Restart the receiver

11- Go to your box “Favorites” and you should have a new bouquet with the name Franqie IPTV.

If above does not work, the following may help:

1. There is some plugin that maybe needs to install on your device:

opkg install

opkg install

opkg install

opkg install

deb install

deb install

“Mips32el” is used for the most boxes. Example VU zero, Vu Duo, Zgemma and mostly above openpli 4 boxes or new images.

“Mipsel” is used for old boxes dm800 clones with old openpli 2.1

“sh4” is used for boxes like spark

“armv7a” is used by new boxes like vu 4k and gigablue sf4008

for other devices please do a search

2. Connect your device with a LAN cable to your PC

3. Download and install DCC or Putty

4. Connect to your device with telnet protocol in PuTTY and run one of these commands (depends on the CPU architecture)

5. Connect your device to a monitor(TV) and run the plugin

6. Provide us the MAC address

Taylor is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.